Doing The Head

A Twin Cam Cylinder Head

When it comes to getting the most power out of a naturally aspirated engine the key area that you must focus your attention on is the cylinder head. This is the one area that will potentially give you the greatest increase in engine power. Why? Well, as Langer explains in engine building and power basics, the key to increasing an engines horse power is to get the engine to ingest more air and be able to expel the resultant increase in exhaust gasses, in other words, getting the engine to pump more air by increasing the air-flow in and out of the engine.

On a motor car engine, there are three areas that can affect air-flow and where you can make improvements. These are:

• The intake system, which includes the air filter, plenum and the intake runners.
• The exhaust system, which includes the exhaust header, catalyst converter and the mufflers.
• The cylinder head, which includes the cylinder head ports, valve area and the camshafts.

We've discussed the intake system and the exhaust system elsewhere on this web site so now it's time for us to turn our attention to modifying the cylinder head. However, in this section we're going to discuss a little bit more than just the cylinder head, we're going to discuss cylinder head porting, gas flowing and power tuning the cylinder head, old school style! We'll also be discussing performance camshafts, cam timing, valve timing and valve overlap.

A word of warning though, cylinder head porting and gas flowing is a rather advanced form of car modification and is not for the novice or for the faint of heart. Cylinder head porting is a skill that must be developed and honed by hours and hours of practice. If you're intent on trying cylinder head porting, the first thing that you need to know is the porting always begins by trial and error so if you're going to do your own cylinder head porting, start on a cylinder head that you can afford to total, in fact, start with a couple that you don't mind loosing. Otherwise you should leave cylinder head porting up to a professional with a flow bench. The other thing to note, is that cylinder head porting requires some rather expensive tools. You'll need a high-speed extended pneumatic die-grinder with carbide and steel grinders, and a high-pressure air compressor (no, we're not talking about turbochargers here) to power the grinder. You could use an electric die-grinder rather than a die-grinder, but electric die-grinders don't operate at a high-speed like pneumatic die-grinders. You could also use an electic drill rather than a die-grinder but you won't get the same results as you would with a longer, more agile and thinner die-grinder. An electric drill also does not operate at the high-speeds that a pneumatic die-grinder does.

A Pneumatic Die Grinder

Right, if you've read all that, bought your air compressor and your die-grinder, and gotten hold of a few spare cylinder heads, despite our warnings, then we can move on and start modifying the cylinder head for extreme power. But remember that we did warn you. Right, we'll begin by looking at the camshaft before moving on to the equipment you'll require to port your cylinder head, the basics of gas flowing and cylinder head porting itself.

Engine Building for Power and Reliability

If you're planning to do some serious modifications to a four stroke engine, you'd better do it right if you don't want to end up with an expensive pile of scrap metal. It's easy to slap on a turbo and run mild boost on a stock engine or even fitting a bigger turbo to an OEM turbo engine, but if you're looking for serious power, you have to rebuild the subassembly to ensure that it can handle the additional power without disintegrating. Obviously you need to ensure that your drive train can handle the extra engine power as well, but in this section we'll discuss engine building for maximum power, starting with the subassembly.

THE CYLINDER BLOCK

You've got to start by ensuring that your cylinder block is race grade. Even if you're just building a street race car, engine tuning would be senseless if the block is not up to the job. Start by pressure testing the block. If you have an air compressor you can do this yourself. Strip down the engine but leave the Welch plugs and oil gallery plugs in place. Fit the bare cylinder head to the cylinder block using new head gasket or one that's not too worn. Close all water opening off with steel plates. One of the plates must be fitted with an air line fitting that you can connect your air compressor to. Gradually increase the pressure in the block to 40 psi. Don't increase the pressure too quickly as a loose fitting Welch plug or a weak spot in the block could blow out can cause you serious injury. If everything is still in place, gradually increase the pressure to 50 psi. Now spray the block with a mild water/detergent mixture. Carefully check the block for air bubbles. If you see bubbles, either have it repaired or test another block. If you get no bubbles, release the air pressure and remove the cylinder head. Use a plug tap to clean the head stud and main bearing cap threads and chamfer any stud hole that is not already chamfered. This will prevent the thread from pulling up. Grind away any casting sag, especially around the main bearing webs, the sump pan deck, and the valley area of a Vee engine. This will prevent cracks from developing. Now remove all the Welch plugs and oil gallery plugs and have the block boiled and cleaned in a chemical bath. This will remove all rust and scale in the water channels, and the caked oil in the oil galleries.

THE CRANKSHAFT & CON RODS

Chrome-moly forged con rods

The stock crankshaft and con rods are usually cast iron items that can be retained if the engine is not required to handle high boost pressures, high horse power, and high revs. Forged crankshafts and con rods are much stronger and are more suitable for high load, high rev engines. In either event, you should have the crankshaft and con rods Magnafluxed to check for cracks.

If the crankshaft has no cracks, check it for straightness. A crankshaft that is even 0.002in out of straight will increase bearing load and will be the cause of bearing failure. If your crankshaft is out of straight, you have two options – either have the crankshaft straightened or machine the crankshaft's main journals so that crankshaft rotation is true. However, straightening a crankshaft that is to be used for a high boost, high horse power, and high rev engine is a waste of time and money as the combustion pressure and inertia loads will reverse the straightening process. Machining the crankshaft journals will also weaken the crankshaft. Ultimately, replacing a bent crankshaft is your best option.

It goes without saying that all the crankshaft journals should be checked for roundness and size. The same goes for the big end on the con rods. The crankshaft, con rods, and flywheel should then be balanced statically and dynamically to reduce shock loading and vibration.

THE PISTONS

High strength forged pistons

The next thing you need to consider is the pistons. Most OEM engines are fitted with cast aluminum pistons with a slotted oil groove. High performance OEM engines may be fitted with hypereutectic cast aluminum pistons that have a higher silicon content. The higher silicon content makes the cast material much harder and more wear resistant, which allows these pistons to withstand greater temperature and pressure loads. This makes these pistons ideal for street racers. However, the higher silicon content also makes the pistons more brittle and prone to breaking under detonation. Thus, these pistons are not a good choice for forced induction applications where the possibility of detonation in greatly increased.

Forged pistons, on the other hand, have much denser and even harder than hypereutectic cast aluminum pistons but are not as prone to breaking under detonation. Forged pistons also have drilled oil holes round the oil groove rather than a slot in the oil groove. This makes them the best option for high horse power, forced induction engines.

Pistons can also be either full skirt pistons or slipper type. The full skirt pistons are heavier but stronger and less prone to wobble. Needless to say, they would be the best option for any engine modification project.

Maximizing Engine Power

The four stroke engine.

Custom-car.us is all about engine tuning and car performance; so if you want to know about car tuning, how to increase engine power and how to modify your car, then you've come to the right place. However, before we can start talking about engine tuning and increasing engine power and torque, we first need to have a basic understanding of how an internal combustion engine produces power. Therefore, over the next few pages of this section, we'll discuss the various basic concepts and principles of the internal combustion engines and the common terms used to discuss engine modifications, such as volumetric efficiency, engine displacement and air density as all of these influence engine power and performance. We also have a glossary of car modification terms that you can check for the meaning of some of the terms we use on this site. Once we have a clear understanding of how a four stroke engine produces power, we can move on and start make our P.L.A.N.s to increase engine performance.

Although there are two types of internal combustion engines, namely the two stroke engine and the four stroke engine, we're only interested in car performance and since the two-stroke engine is not used on cars, we won't be discussing that engine here. Instead we'll focus out attentions soely on the four-stroke engine because custom-car.us is all about car tuning and because cars use the four-stroke engine and not the two-stoke engine. If you're looking for information about the two-stroke engine, you could try How Stuff Works or Wikipedia.

The Wankel rotary engine.

There are also numerous derivatives of the four stroke engine – diesel engines, petrol engines, four cylinder engines, straight sixes, boxer engines, rotary or wankel engines, turbocharged engines, supercharged engines, etc. With the marked exception of the rotary engine, all four stroke engines have a common basic design – they all consist of individual cylinders with pistons that are connected to a flywheel by a crankshaft, and they all make use of what is known as the Otto Cycle. This makes it fairly easy to discuss basic engine power concepts as we don't need to concern ourselves with V's and straights, boxers and horizontally opposed engines. Instead our discussion can and will be all about the four stroke internal combustion engine. In addition, the diesel engine has had a resurgence in recent years and has become more of a performance engine, especially the turbo-diesel engine. A lot of what we discuss here can be applied to modern diesel engines but there are some aspects of engine modification that are specific to diesel engines; for this reason we'll discuss diesel engines and diesel engine modifications on their own.

So let us begin by looking at the four strokes of the four stroke internal combustion engine otherwise known as the Otto cycle. You can skip this section if you're already familiar with the Otto cycle and head on over to basic engine power or engine building, but this section does tie into most of what we discuss on Custom-car.us. If you're intereseted in modifying diesel engines, hop on over to our page on diesel engines to find out how to apply our discussions to diesel engines.